Hi Everyone Hope you are all well. We wanted to showcase the card we created during our first facebook live, last Saturday. If you missed it – you can catch up over on our facebook page. Thank you to those who did tune in. We made a beautiful card using the Gerbera Clear Stamp Set.
In case you did miss the video – here’s a list of the items you need to create this card;
Hi Everyone We have been playing with the new Gerbera clear stamps – this time we are going to show you how to create this lovely stamped/heat embossed floral boarder. Below we will give you a step by step guide and also the materials you’ll need to get started.
* Twinkle Lane Designs – Daisy Posy Clear Stamp Set * Watercolour Card *Clear Embossing Ink Pad * Wow Ebony Embossing Powder * Heat Gun * Watercolour Paints / Pencils * Paper cutter / Scissors / Craft Knife * Scrap Paper
Step By Step guide:
Step 1: on a scrap piece of paper stamp the daisy posy – cut around the flower heads & then cut the stems out, so they are two separate pieces. This will make two masks you’ll need when stamping.
Step 2: wipe clean your stamp. Ink up the flower head with your embossing ink pad & mask off the stems – mine naturally stayed onto the stamp. Stamp onto the watercolour paper – sprinkle your embossing powder over & heat.
Step 3: take your flower head mask & mask the image you’ve just stamped & repeat the process twice more. Tip you may need a little low tack tape to keep your mask in place.
Step 4: Once you’ve finished stamping – you flower boarder should look like this. (You may notice I’ve added in a few stamped leaves on either side – this is a optional). Now it’s time to start watercolouring the flowers – you can do any colour combo you like.
Step 5: We’ve given you two options – you could take a paper cutter & cut into a rectangle – leaving a nice boarder around the edge.
Step 6: or if want to take the background out – use scissor to cut around the outside edges & with a craft knife cut the small pieces out between the flowers.
Now your ready to create a card with this finished piece
This week we launched our Brand New ‘Daisy Posy’ Clear Stamps & today we are going to show you how to create this cute mini Birthday Card. Below we will list the materials & show you a step by step guide – lets go…
What you’ll need;
* Twinkle Lane Designs – Daisy Posy Clear Stamp Set * White Card * Blue Card * Embossing Folder * Small Pearls * Ribbon * Black Ink Pad * Alcohol Markers / Colouring Pencils * Glitter * Foam Pads *Edge Die * Double Sided Tape
STEP BY STEP Guide
Step 1: With a plain white piece of card – stamp your daisy posy twice – you will need to use an ink pad which doesn’t bleed when using alcohol markers. We’ve gone for blue hues but you could a colour of your choice. Once I’ve shaded with promarkers, I then put shading in with coloured pencils.
Step 2: Once your happy with the shading – cut around the daisy flowers – cutting off the stalks. Then take another piece of A4 white card – fold in half to make an A5 card – measure the centre point & cut in half – this will give you an A6 card. Fold will be to the left & opening to the right.
Step 3: Blue card measurement; 5.7 x 14.8cms White card measurement; 5.1 x 14.8cms These measurements include the fancy edge cut with the die.
Step 4: With foam pads – stick these to the back of both cut out daisies & the blue piece of card. Remember not to place foam pads where your daisies go behind the blue card. Instead place a little double sided tape there – to make sure the edges stick down.
Step 5: With your die cut edge white piece of card – grab an embossing folder & emboss your card.
Step 6: With some ribbon (we’ve used gingham) stick this in the middle of the embossed piece of white card & then stick the card down with double sided tape to the blue card.
Step 7: Time for some finishing touches. Cut some extra ribbon & tie this into your strip of ribbon in a knot – to create a faux bow. Using the Happy Birthday stamp in the pack – stamp this on a scrap piece of paper & cut it into a small rectangle. Glue small pearls onto the edges of the cut shape. Then add some glitter to the centre of the flower – for a little sparkle.
Get your Daisy Posy (Gerbera Daisy Flower) Stamp Set HERE
Hello Everyone Today we are sharing with you our second sample using the Comos Flower Clear Polymer Stamps. When we first started shading the flowers they started off a more pale, pastel colours but once we layered the promarkers and coloured pencils they ended up much bright and bolder. Below we will give a list of materials we used & how to guide to create this eye catching Birthday card.
What you’ll need; * Twinkle Lane Designs – Cosmos Flower Clear Stamp Set *Alcohol Markers and Coloured Pencils * 7×7 Card Black * White Card * Black Card * Adhesive Gems * Green Card * Glitter (Gold & Silver) * Black Ink Pad * Square Nesting Die & Lacy Die (we’ve used a Sue Wilson Die) * Foam Pads & Double Sided Tape * Scrap Paper
Step 1: With the square nesting dies – cut the black card 7×7″ & then take the next size nesting square down & cut this one in white card. You will then need to stamp the smaller cosmos twice onto the scrap piece of paper to create a mask. Cut around the edge – you will need this once you start stamping around the edge of the white square card.
Step 2: Start stamping with the smaller cosmos in one of the corner. Mask this one & then continue stamping around the whole edge of the white card. When you get to the final cosmos – you will need to mask off the two cosmos flower on either side.
Step 3: Shade in all the cosmos flower in a colour palette of your choice – we’ve choosen five bright shades. Using promarkers and coloured pencils to shade each one. Once they are all shaded – use a glue pen around the outside edge & sprinkle silver glitter over the glue & tap off excess.
Step 4: On your spare bit of white card stamp our some individual cosmos flowers – shade those & cut round the outside edge. You can add a little gold glitter to the centers on each flower.
Step 5: I’ve used a Sue Wilson die & cut it in a spare piece of black card. Then with the same die set cut out a center piece & stamped a Happy Birthday sentiment in the middle. Laying these piece up with foam pads & stuck into the center of the stamp cosmos background.
Step 6: Once all your layers have been glued to the card blank – finish the card off with the individual cosmos flowers you stamped earlier & then some adhesive gems in the corners.